Rotan gear pumps

ED - Environmental Duty

Rotan gear pumper

Magnetically coupled pumps for ultimate protection against leakage.

As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with traditionally sealed pumps, especially where the application requires the use of double mechanical shaft seals. Often these applications are very arduous resulting in the seals and support system requiring regular attention and/or replacement. Thus, the life cycle costs for ED pumps are generally much lower than for pumps using two seals.

Available with 90° angular configuration.

Materials: Cast iron, carbon steel or stainless steel
Capacity Range: Up to 90 m3/h / 400 gpm
Speed: Up to 1750 rpm
Differential Pressure: Up to 16 bar / 250 psi
Suction Lift: Up to 0.5 bar / 15" Hg vacuum while priming
Suction Lift: Up to 0.8 bar / 24" Hg vacuum while pumping
Viscosity Range: Up to 10,000 cSt
Temperature: Up to 250°C / 500° F

Typical Applications:

Where no leakage, liquid or gaseous, is allowed.

Pumping of:

• Isocyanate
• Solvents
• Hazardous organic liquids
• Printing ink
• Resin
• Pitch
• Alkyd resin
• Soyabean oil
• Linseed oil
• Monomers
• Polyol
• Corn syrup

Technical information